The LXC series metering screw scale is a new type of electronic scale that organically combines the weighing technical principle of the lever-type electronic belt scale with the screw conveyor. It is mainly applicable to metering equipment for continuously conveying powdered and bulk materials, performing dynamic metering, and controlling the feeding amount. It is especially suitable for places where other types of electronic metering equipment cannot be installed due to limited space during the renovation process of old factories.
Working Principle
During the process of the material being screw-conveyed, the weighing sensor installed under the screw conveyor detects the weight of the material and generates a voltage signal proportional to the load. Meanwhile, the speed sensor installed at the tail of the screw conveyor detects the speed signal of the main shaft of the screw conveyor. Both signals are simultaneously sent to the weighing integrator, and after integral operation, the instantaneous flow value and the cumulative amount value are obtained.
System Characteristics
Sealed structure, preventing dust from scattering.
Combining dynamic metering with screw conveyance to achieve dynamic continuous metering.
Compact structure, occupying a small space, and having reliable running stability.
Automatic zero adjustment and automatic interval adjustment, with all parameters inputted by key pressing.
Using weight calibration, which is simple and convenient.
Photoelectric speed measurement sensor, with high precision and strong anti-interference ability.
It can achieve fixed-ratio and fixed-quantity batching in cooperation with the impeller feeder, or can also achieve speed-adjusting batching by using the direct pressure type of the silo.
Main Technical Parameters
Weighing capacity: ≤ 300 t/h
Metering accuracy: better than ± 0.5%
Feeding distance (center distance) > 1000 mm
Current output: 0 ~ 20 mA or 4 ~ 20 mA
Communication interface: RS232 or RS485
